View MKP386M510100JT2_6930760.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 1 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 metallized polypropylene film capacitor radial snubber type features ? reduce emi by clamping voltage and current ringing ? high pulse strength (dv/dt up to 2500 v/s) ? low inductance construction (low esl) ?low esr ? material categorization: ? for definitions of co mpliance please see www.vishay.com/doc?99912 applications ? photovoltaic and wind inverters ? motor drives ? frequency converters ? direct mount on igbt modules notes ?for more detailed data and test requirements contact dc-film@vishay.com ? for general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) see document voltage proof te st for metalized capacitors ( www.vishay.com/doc?28169 ) quick reference data rated capacitance ra nge 0.047 f to 10 f capacitance tolerance 5 %/ 10 % rated (dc) voltage, u ndc 700 v, 850 v, 1000 v, 1250 v, 1600 v, 2000 v, 2500 v climatic testing class 50/105/56 rated temperature 85 c maximum permis sible case temperature 105 c rated (ac) voltage 420 v, 400 v to 450 v, 425 v to 500 v, 450 v to 550 v, 450 v to 600 v, 700 v, 800 v reference standards iec 60384-17 dielectric polypropylene film electrodes metallized film construction series construction encapsulation flame retardant plastic case and epoxy resin sealed terminals tinned coated copper self inductance (l s ) < 0.7 nh per mm of lead spacing withstanding dc volt age between terminals (1) 1.6 u rdc for 60 s (maximum ri se time 1000 v/s; cut off current 10 ma) test voltage between terminals and case 1.4 u rac + 2000 v dc for 60 s insulation resistance rc between leads, at 500 v after 1 min: > 100 g ? for c ? 0.33 f > 30 000 s for c > 0.33 f performance grade grade 1 (long life) stability grade grade 2 life time expectancy operation life > 300 000 h - failure rate < 5 fit (40 c and 0.5 x u r ) marking c-value, tolerance code, rated voltage, manufacturers emblem, code for dielectric material, manufacturers type designation, year and week, manufacturers location dc voltage ratings u rdc 700 v dc 850 v dc 1000 v dc 1250 v dc 1600 v dc 2000 v dc 2500 v dc u rac 420 v ac 450 v ac 500 v ac 550 v ac 600 v ac 700 v ac 800 v ac
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 2 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters and available terminal versions p1 0.8 0.05 8.2 1 14 min. d 15 1 6 0.1 6.8 1 lw h t1 6 1 p2 l 44 28 23 10.2 58 43 38 25.2 p1 0.5 p2 0.5 d min. 0.8 0.05 8.2 1 6 1 14 min. d 15 1 6 0.1 6.8 1 lw h p1 t2 p2 l 44 24.5 19.5 6.2 58 39.5 34.5 21.2 p1 0.5 p2 0.5 d min. 15 0.3 a 5 0.2 6 0.2 p1 0.5 10 0.3 l 5 0.5 h w t3 l 33.5 47 57 44 57 67 58 72 82 p1 0.5 a 1 a 13.5 0.2 d 6 0.1 5 0.2 p1 p2 l h w 3 0.5 0.5 t4 l 44 28 22 11 58 43 37 26 38 53 p1 0.5 p2 0.5 d min. a 0.5 p1 p2 15 0.3 d 14.5 1 7.5 0.5 6.3 0.1 0.8 0.1 3.2 1.0 3 1.0 lh w t5 l 33.5 32.3 22.7 11 44 42.3 32.7 21 58 57.3 47.7 36 p1 1 p2 1 d min. p1 p2 15 0.3 d 14.5 1 7.5 0.5 6.3 0.1 1 0.1 3.2 1.0 3 1.0 l h w t6 l 44 32.3 22.7 11 58 47.3 37.7 26 p1 1 p2 1 d min.
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 3 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 composition of catalog number dimensions in millimeters and available terminal versions p1 p2 15 0.3 d 18 1 8 0.2 6.3 0.1 0.8 0.1 12.8 max. 3.5 1.0 l h w t7 l 33.5 32.3 22.7 11 44 42.3 32.7 21 58 57.3 47.7 36 p1 1 p2 1 d min. p1 p2 d 15 0.3 18 1 8 0.2 6.3 0.1 1 0.1 12.8 max. 3.5 1.0 l h w t8 l 44 32.3 22.7 11 58 47.3 37.7 26 p1 1 p2 1 d min. capacitance (numerically) example multiplier (nf) mini version single metallized special code for terminal drawing l (mm) p 1 (mm) p 2 (mm) drawing metallized polypropylene tolerance voltage type 2 0.1 4 68 = 680 nf 070 700 v dc 085 850 v dc 44 28 0.5 23 0.5 58 t1 43 0.5 38 0.5 44 24.5 0.5 19.5 0.5 58 t2 39.5 0.5 34.5 0.5 44 57 0.5 - 33.5 47 0.5 - 58 t3 72 0.5 - 100 1000 v dc 125 1250 v dc 160 1600 v dc 200 2000 v dc 250 2500 v dc j k y 5 % 10 % 5 % l = 33.5 mm/44.0 mm l = 33.5 mm/44.0 mm l = 58 mm 31 410 5 mkp 386 m 4 68 160 j t8 100 44 42.3 1 33.5 32.3 1 58 t5 57.3 1 44 28 0.5 22 0.5 58 t4 43 0.5 37 0.5 44 32.3 1 22.7 1 58 t6 47.3 1 37.7 1 22.7 1 32.7 1 47.7 1 44 42.3 1 33.5 32.3 1 58 t7 57.3 1 44 32.3 1 22.7 1 58 t8 47.3 1 37.7 1 22.7 1 32.7 1 47.7 1
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 4 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical data and ordering code u rdc (v) cap. (f) dimension (mm) (4) du/dt (v/s) i peak (a) i rms (2) (a) esr (3) (m) tan ? 1 khz < (10 -4 ) tan ? 10 khz < (10 -4 ) tan ? 100 khz < (10 -4 ) ordering code (1) whl 700 u rac = 420 v; u pp = 1130 v 0.47 22.0 30.5 33.5 800 376 7.0 16.0 4.0 8.0 50 mkp386m447070j** 0.68 22.0 30.5 33.5 800 544 8.0 11.0 4.0 8.0 50 mkp386m468070j** 1.0 22.0 30.5 33.5 800 800 9.0 7.5 4.0 8.0 50 mkp386m510070j** 1.5 22.0 30.5 33.5 800 1200 10.0 5.0 4.0 8.0 - mkp386m515070j** 2.0 22.0 38.0 44.0 370 740 10.0 7.5 5.0 15.0 - mkp386m520070j** 2.2 22.0 38.0 44.0 370 814 10.0 6.5 5.0 15.0 - mkp386m522070j** 3.0 30.0 46.0 44.0 370 1110 14.0 5.5 5.0 15.0 - mkp386m530070j** 3.3 30.0 46.0 44.0 370 1221 14.0 5.0 5.0 15.0 - mkp386m533070j** 4.0 30.0 46.0 44.0 370 1480 15.0 4.5 5.0 15.0 - mkp386m540070j** 4.7 30.0 46.0 44.0 370 1739 15.0 6.0 5.0 15.0 - mkp386m547070j** 5.0 30.0 46.0 44.0 370 1850 15.0 6.0 5.0 15.0 - mkp386m550070j** 850 u rac = 450 v; u pp = 1300 v 0.47 22.0 30.5 33.5 800 376 7.5 13.0 4.0 8.0 50 mkp386m447085j** 0.68 22.0 30.5 33.5 800 544 8.5 10.0 4.0 8.0 50 mkp386m468085j** 0.82 22.0 30.5 33.5 800 656 9.0 8.5 4.0 8.0 50 mkp386m482085j** 1.0 22.0 30.5 33.5 800 800 10.0 7.0 4.0 8.0 50 mkp386m510085j** 1.5 22.0 38.0 44.0 370 555 10.0 9.0 5.0 15.0 - mkp386m515085j** 2.0 22.0 38.0 44.0 370 740 12.0 7.0 5.0 15.0 - mkp386m520085j** 2.2 22.0 38.0 44.0 370 814 13.0 6.0 5.0 15.0 - mkp386m522085j** 3.0 30.0 46.0 44.0 370 1110 16.0 4.5 5.0 15.0 - mkp386m530085j** 3.3 30.0 46.0 44.0 370 1221 16.0 4.0 5.0 15.0 - mkp386m533085j** 4.0 30.0 46.0 44.0 370 1480 18.0 3.5 5.0 15.0 - mkp386m540085j** u rac = 400 v; u pp = 1200 v 4.7 25.0 45.0 58.0 170 798 17.5 4.0 6.0 25 - mkp386m547085y** 5.0 25.0 45.0 58.0 170 849 18.0 3.5 6.0 25 - mkp386m550085y** 6.0 30.0 45.0 58.0 170 1019 20.5 3.0 6.0 25 - mkp386m560085y** 7.0 30.0 45.0 58.0 170 1189 22.5 2.5 6.0 25 - mkp386m570085y** 8.0 35.0 50.0 58.0 170 1358 26.0 2.0 6.0 25 - mkp386m580085y** 10 35.0 50.0 58.0 170 1698 29.0 1.5 6.0 25 - mkp386m610085y** 1000 u rac = 500 v; u pp = 1400 v 0.47 22.0 30.5 33.5 725 341 7.5 13.0 4.0 8.0 50 mkp386m447100j** 0.56 22.0 30.5 33.5 725 406 8.0 11.0 4.0 8.0 50 mkp386m456100j** 0.68 22.0 30.5 33.5 725 493 9.0 9.0 4.0 8.0 50 mkp386m468100j** 0.82 22.0 30.5 33.5 725 595 9.0 7.5 4.0 8.0 50 mkp386m482100j** 1.0 22.0 30.5 33.5 725 725 10.0 6.0 4.0 8.0 50 mkp386m510100j** 1.2 22.0 38.0 44.0 340 408 10.0 10.0 5.0 15.0 - mkp386m512100j** 1.5 22.0 38.0 44.0 340 510 11.0 8.0 5.0 15.0 - mkp386m515100j** 1.8 22.0 38.0 44.0 340 612 12.0 6.5 5.0 15.0 - mkp386m518100j** 2.0 30.0 46.0 44.0 340 680 14.0 6.0 5.0 15.0 - mkp386m520100j** 2.2 30.0 46.0 44.0 340 748 15.0 5.5 5.0 15.0 - mkp386m522100j** 2.5 30.0 46.0 44.0 340 850 15.0 5.0 5.0 15.0 - mkp386m525100j** 2.7 30.0 46.0 44.0 340 918 16.0 4.5 5.0 15.0 - mkp386m527100j** 3.3 30.0 46.0 44.0 340 1122 18.0 3.5 5.0 15.0 - mkp386m533100j** u rac = 425 v; u pp = 1200 v 3.3 25.0 45.0 58.0 205 677 16.0 4.5 7.5 25 - mkp386m533100y** 4.0 25.0 45.0 58.0 205 820 17.5 3.5 7.5 25 - mkp386m540100y** 4.7 30.0 45.0 58.0 205 964 20.0 3.0 7.5 25 - mkp386m547100y** 5.0 30.0 45.0 58.0 205 1025 21.0 3.0 7.5 25 - mkp386m550100y** 6.0 35.0 50.0 58.0 205 1230 24.5 2.5 7.5 25 - mkp386m560100y** 7.0 35.0 50.0 58.0 205 1435 26.5 2.0 7.5 25 - mkp386m570100y**
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 5 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 1250 u rac = 550 v; u pp = 1550 v 0.33 22.0 30.5 33.5 800 264 7.0 16.0 4.0 8.0 40 mkp386m433125j** 0.39 22.0 30.5 33.5 800 312 7.0 14.0 4.0 8.0 40 mkp386m439125j** 0.47 22.0 30.5 33.5 800 376 8.0 11.0 4.0 8.0 40 mkp386m447125j** 0.56 22.0 30.5 33.5 800 448 8.5 10.0 4.0 8.0 40 mkp386m456125j** 0.68 22.0 30.5 33.5 800 544 9.5 8.0 4.0 8.0 40 mkp386m468125j** 0.82 22.0 38.0 44.0 375 308 9.0 13.0 5.0 15.0 60 mkp386m482125j** 1.0 22.0 38.0 44.0 375 375 10.0 10.0 5.0 15.0 60 mkp386m510125j** 1.2 22.0 38.0 44.0 375 450 11.0 9.0 5.0 15.0 - mkp386m512125j** 1.5 30.0 46.0 44.0 375 563 14.0 7.0 5.0 15.0 - mkp386m515125j** 1.8 30.0 46.0 44.0 375 675 15.0 6.0 5.0 15.0 - mkp386m518125j** 2.0 30.0 46.0 44.0 375 750 16.0 5.5 5.0 15.0 - mkp386m520125j** 2.2 30.0 46.0 44.0 375 825 18.0 4.5 5.0 15.0 - mkp386m522125j** u rac = 450 v; u pp = 1300 v 2.2 25.0 45.0 58.0 225 495 14.0 6.0 7.5 20 - mkp386m522125y** 2.5 25.0 45.0 58.0 225 563 15.0 5.0 7.5 20 - mkp386m525125y** 3.0 25.0 45.0 58.0 225 675 16.5 4.0 7.5 20 - mkp386m530125y** 3.3 30.0 45.0 58.0 225 743 18.0 4.0 7.5 20 - mkp386m533125y** 4.0 35.0 50.0 58.0 225 900 21.5 3.0 7.5 20 - mkp386m540125y** 4.7 35.0 50.0 58.0 225 1058 23.5 2.5 7.5 20 - mkp386m547125y** 5.0 35.0 50.0 58.0 225 1125 24.5 2.5 7.5 20 - mkp386m550125y** 1600 u rac = 600 v; u pp = 1690 v 0.22 22.0 30.5 33.5 800 176 7.0 16.0 3.0 5.0 40 mkp386m422160j** 0.27 22.0 30.5 33.5 800 216 7.0 15.0 3.0 5.0 40 mkp386m427160j** 0.33 22.0 30.5 33.5 800 264 8.0 12.0 3.0 5.0 40 mkp386m433160j** 0.39 22.0 30.5 33.5 800 312 8.5 10.0 3.0 5.0 40 mkp386m439160j** 0.47 22.0 30.5 33.5 800 376 9.0 8.5 3.0 5.0 40 mkp386m447160j** 0.56 22.0 38.0 44.0 375 210 9.0 14.0 4.0 10.0 60 mkp386m456160j** 0.68 22.0 38.0 44.0 375 255 9.0 12.0 4.0 10.0 60 mkp386m468160j** 0.82 22.0 38.0 44.0 375 308 10.0 10.0 4.0 10.0 60 mkp386m482160j** 1.0 22.0 38.0 44.0 375 375 12.0 8.0 4.0 10.0 60 mkp386m510160j** 1.3 30.0 46.0 44.0 375 488 16.0 6.0 4.0 10.0 - mkp386m513160j** 1.5 30.0 46.0 44.0 375 563 16.0 5.5 4.0 10.0 - mkp386m515160j** 1.8 30.0 46.0 44.0 375 675 18.0 4.5 4.0 10.0 - mkp386m518160j** 2.0 30.0 46.0 44.0 375 750 19.0 4.0 4.0 10.0 - mkp386m520160k** u rac = 450 v; u pp = 1300 v 1.5 25.0 45.0 58.0 360 540 18.0 3.5 5.0 15 - mkp386m515160y** 2.0 30.0 45.0 58.0 360 720 22.0 2.5 5.0 15 - mkp386m520160y** 2.2 35.0 50.0 58.0 360 792 25.0 2.5 5.0 15 - mkp386m522160y** 2.5 35.0 50.0 58.0 360 900 26.5 2.0 5.0 15 - mkp386m525160y** 2000 u rac = 700 v; u pp = 1980 v 0.047 22.0 30.5 33.5 2000 94 6.0 20.0 3.0 5.0 30 mkp386m347200j** 0.068 22.0 30.5 33.5 2000 136 6.5 17.0 3.0 5.0 30 mkp386m368200j** 0.10 22.0 30.5 33.5 2000 200 8.0 11.0 3.0 5.0 30 mkp386m410200j** 0.12 22.0 30.5 33.5 2000 240 9.0 9.0 3.0 5.0 30 mkp386m412200j** 0.15 22.0 30.5 33.5 2000 300 9.5 8.0 3.0 5.0 30 mkp386m415200j** 0.22 22.0 38.0 44.0 850 187 10.0 10.0 4.0 10.0 50 mkp386m422200j** 0.27 22.0 38.0 44.0 850 230 11.0 8.5 4.0 10.0 50 mkp386m427200j** 0.33 22.0 38.0 44.0 850 281 12.0 7.0 4.0 10.0 50 mkp386m433200j** 0.39 22.0 38.0 44.0 850 332 12.0 6.0 4.0 10.0 50 mkp386m439200j** 0.47 30.0 46.0 44.0 850 400 16.0 5.0 4.0 10.0 50 mkp386m447200j** 0.56 30.0 46.0 44.0 850 476 18.0 4.0 4.0 10.0 50 mkp386m456200j** 0.68 30.0 46.0 44.0 850 578 20.0 3.5 4.0 10.0 50 mkp386m468200j** 0.68 25.0 45.0 58.0 525 357 14.0 6.0 5.0 15.0 75 mkp386m468200y** 0.82 25.0 45.0 58.0 525 431 15.5 5.0 5.0 15.0 75 mkp386m482200y** 1.0 30.0 45.0 58.0 525 525 18.0 4.0 5.0 15.0 - mkp386m510200y** 1.5 35.0 50.0 58.0 525 788 24.0 2.5 5.0 15.0 - mkp386m515200y** electrical data and ordering code u rdc (v) cap. (f) dimension (mm) (4) du/dt (v/s) i peak (a) i rms (2) (a) esr (3) (m) tan ? 1 khz < (10 -4 ) tan ? 10 khz < (10 -4 ) tan ? 100 khz < (10 -4 ) ordering code (1) whl
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 6 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) change the symbol ** according special code for the terminals (see packaging information table) (2) maximum rms current at 100 khz, + 85 c (3) the esr (equivalent series resistance) typical values at 100 khz (4) standard dimension 2500 u rac = 800 v; u pp = 2260 v 0.047 22.0 30.5 33.5 2500 118 6.0 20.0 3.0 5.0 30 mkp386m347250j** 0.068 22.0 30.5 33.5 2500 170 7.0 14.0 3.0 5.0 30 mkp386m368250j** 0.10 22.0 30.5 33.5 2500 250 8.5 10.0 3.0 5.0 30 mkp386m410250j** 0.12 22.0 30.5 33.5 2500 300 9.5 8.0 3.0 5.0 30 mkp386m412250j** 0.15 22.0 38.0 44.0 1000 150 9.5 12.5 4.0 10.0 50 mkp386m415250j** 0.18 22.0 38.0 44.0 1000 180 10.0 11.0 4.0 10.0 50 mkp386m418250j** 0.22 22.0 38.0 44.0 1000 220 11.0 8.5 4.0 10.0 50 mkp386m422250j** 0.33 30.0 46.0 44.0 1000 330 15.0 6.0 4.0 10.0 50 mkp386m433250j** 0.39 30.0 46.0 44.0 1000 390 16.0 5.0 4.0 10.0 50 mkp386m439250j** 0.47 30.0 46.0 44.0 1000 470 18.0 4.0 4.0 10.0 50 mkp386m447250j** 0.47 25.0 45.0 58.0 795 374 15.0 5.5 5.0 15.0 75 mkp386m447250y** 0.56 30.0 45.0 58.0 795 445 17.0 4.5 5.0 15.0 75 mkp386m456250y** 0.68 35.0 50.0 58.0 795 541 20.5 4.0 5.0 15.0 75 mkp386m468250y** 0.82 35.0 50.0 58.0 795 652 22.5 3.0 5.0 15.0 75 mkp386m482250y** packaging information u rdc (v) cap. (f) ordering code (1) mass (g) terminal available - spq (pcs) t1 t2 t3 t4 t5 t6 t7 t8 700 0.47 mkp386m447070j** 41 48 48 55 0.68 mkp386m468070j** 40 48 48 55 1.0 mkp386m510070j** 38 48 48 55 1.5 mkp386m515070j** 36 48 48 55 2.0 mkp386m520070j** 60 42 42 36 42 36 42 36 42 2.2 mkp386m522070j** 59 42 42 36 42 36 42 36 42 3.0 mkp386m530070j** 94 63 63 54 63 60 63 60 63 3.3 mkp386m533070j** 93 63 63 54 63 60 63 60 63 4.0 mkp386m540070j** 89 63 63 54 63 60 63 60 63 4.7 mkp386m547070j** 86 63 63 54 63 60 63 60 63 5.0 mkp386m550070j** 84 63 63 54 63 60 63 60 63 850 0.47 mkp386m447085j** 40 48 48 55 0.68 mkp386m468085j** 39 48 48 55 0.82 mkp386m482085j** 38 48 48 55 1.0 mkp386m510085j** 37 48 48 55 1.5 mkp386m515085j** 61 42 42 36 42 36 42 36 42 2.0 mkp386m520085j** 58 42 42 36 42 36 42 36 42 2.2 mkp386m522085j** 57 42 42 36 42 36 42 36 42 3.0 mkp386m530085j** 91 63 63 54 63 60 63 60 63 3.3 mkp386m533085j** 89 63 63 54 63 60 63 60 63 4.0 mkp386m540085j** 89 63 63 54 63 60 63 60 63 4.7 mkp386m547085y** 48 50 50 48 55 55 55 50 50 5.0 mkp386m550085y** 49.5 50 50 48 55 55 55 50 50 6.0 mkp386m560085y** 56.5 45 45 40 45 45 45 45 45 7.0 mkp386m570085y** 61.5 45 45 40 45 45 45 45 45 8.0 mkp386m580085y** 70 35 35 36 40 40 40 35 35 10 mkp386m610085y** 80.5 35 35 36 40 40 40 35 35 electrical data and ordering code u rdc (v) cap. (f) dimension (mm) (4) du/dt (v/s) i peak (a) i rms (2) (a) esr (3) (m) tan ? 1 khz < (10 -4 ) tan ? 10 khz < (10 -4 ) tan ? 100 khz < (10 -4 ) ordering code (1) whl
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 7 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 1000 0.47 mkp386m447100j** 44 48 48 55 0.56 mkp386m456100j** 44 48 48 55 0.68 mkp386m468100j** 44 48 48 55 0.82 mkp386m482100j** 44 48 48 55 1.0 mkp386m510100j** 44 48 48 55 1.2 mkp386m512100j** 68 42 42 36 42 36 42 36 42 1.5 mkp386m515100j** 68 42 42 36 42 36 42 36 42 1.8 mkp386m518100j** 68 42 42 36 42 36 42 36 42 2.0 mkp386m520100j** 106 63 63 54 63 60 63 60 63 2.2 mkp386m522100j** 106 63 63 54 63 60 63 60 63 2.5 mkp386m525100j** 105 63 63 54 63 60 63 60 63 2.7 mkp386m527100j** 105 63 63 54 63 60 63 60 63 3.3 mkp386m533100j** 104 63 63 54 63 60 63 60 63 3.3 mkp386m533100y** 48.5 50 50 48 55 55 55 50 50 4.0 mkp386m540100y** 53.5 50 50 48 55 55 55 50 50 4.7 mkp386m547100y** 60.5 45 45 40 45 45 45 45 45 5.0 mkp386m550100y** 62.5 45 45 40 45 45 45 45 45 6.0 mkp386m560100y** 73.5 35 35 36 40 40 40 35 35 7.0 mkp386m570100y** 81 35 35 36 40 40 40 35 35 1250 0.33 mkp386m433125j** 44 48 48 55 0.39 mkp386m439125j** 44 48 48 55 0.47 mkp386m447125j** 44 48 48 55 0.56 mkp386m456125j** 44 48 48 55 0.68 mkp386m468125j** 44 48 48 55 0.82 mkp386m482125j** 68 42 42 36 42 36 42 36 42 1.0 mkp386m510125j** 68 42 42 36 42 36 42 36 42 1.2 mkp386m512125j** 68 42 42 36 42 36 42 36 42 1.5 mkp386m515125j** 106 63 63 54 63 60 63 60 63 1.8 mkp386m518125j** 105 63 63 54 63 60 63 60 63 2.0 mkp386m520125j** 105 63 63 54 63 60 63 60 63 2.2 mkp386m522125j** 105 63 63 54 63 60 63 60 63 2.2 mkp386m522125y** 46 50 50 48 55 55 55 50 50 2.5 mkp386m525125y** 49 50 50 48 55 55 55 50 50 3.0 mkp386m530125y** 54.5 50 50 48 55 55 55 50 50 3.3 mkp386m533125y** 59 45 45 40 45 45 45 45 45 4.0 mkp386m540125y** 69 35 35 36 40 40 40 35 35 4.7 mkp386m547125y** 76.5 35 35 36 40 40 40 35 35 5.0 mkp386m550125y** 79.5 35 35 36 40 40 40 35 35 1600 0.22 mkp386m422160j** 44 48 48 55 0.27 mkp386m427160j** 44 48 48 55 0.33 mkp386m433160j** 44 48 48 55 0.39 mkp386m439160j** 44 48 48 55 0.47 mkp386m447160j** 44 48 48 55 0.56 mkp386m456160j** 68 42 42 36 42 36 42 36 42 0.68 mkp386m468160j** 68 42 42 36 42 36 42 36 42 0.82 mkp386m482160j** 68 42 42 36 42 36 42 36 42 1.0 mkp386m510160j** 67 42 42 36 42 36 42 36 42 1.3 mkp386m513160j** 105 63 63 54 63 60 63 60 63 1.5 mkp386m515160j** 104 63 63 54 63 60 63 60 63 1.8 mkp386m518160j** 103 63 63 54 63 60 63 60 63 2.0 mkp386m520160k** 100 63 63 54 63 60 63 60 63 1.5 mkp386m515160y** 52.5 50 50 48 55 55 55 50 50 2.0 mkp386m520160y** 64 45 45 40 45 45 45 45 45 2.2 mkp386m522160y** 71 35 35 36 40 40 40 35 35 2.5 mkp386m525160y** 77 35 35 36 40 40 40 35 35 packaging information u rdc (v) cap. (f) ordering code (1) mass (g) terminal available - spq (pcs) t1 t2 t3 t4 t5 t6 t7 t8
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 8 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) change the ** symbol according special code for the terminals construction low inductive wound cells elements of metallized polypropylene film, potted with resin in flame retardant case. series construction for 420 v ac to 600 v ac versions build in case width ? 44 mm and 450 v ac to 550 v ac versions build in case width > 44 mm. triple construction for 700 v ac and 800 v ac versions build in case width ? 44 mm and 550 v ac to 700 v ac versions build in case width > 44 mm. series construction with 4 sections for 800 v ac versions build in case width > 44 mm. 2000 0.047 mkp386m347200j** 42 84 48 55 0.068 mkp386m368200j** 41 84 48 55 0.10 mkp386m410200j** 40 48 48 55 0.12 mkp386m412200j** 39 48 48 55 0.15 mkp386m415200j** 38 48 48 55 0.22 mkp386m422200j** 63 42 42 36 42 36 42 36 42 0.27 mkp386m427200j** 61 42 42 36 42 36 42 36 42 0.33 mkp386m433200j** 59 42 42 36 42 36 42 36 42 0.39 mkp386m439200j** 57 42 42 36 42 36 42 36 42 0.47 mkp386m447200j** 93 63 63 54 63 60 63 60 63 0.56 mkp386m456200j** 90 63 63 54 63 60 63 60 63 0.68 mkp386m468200j** 86 63 63 54 63 60 63 60 63 0.68 mkp386m468200y** 47.5 50 50 48 55 55 55 50 50 0.82 mkp386m482200y** 52.5 50 50 48 55 55 55 50 50 1.0 mkp386m510200y** 60 45 45 40 45 45 45 45 45 1.5 mkp386m515200y** 81 35 35 36 40 40 40 35 35 2500 0.047 mkp386m347250j** 41 84 48 55 0.068 mkp386m368250j** 39 48 48 55 0.10 mkp386m410250j** 37 48 48 55 0.12 mkp386m412250j** 36 48 48 55 0.15 mkp386m415250j** 62 42 42 36 42 36 42 36 42 0.18 mkp386m418250j** 61 42 42 36 42 36 42 36 42 0.22 mkp386m422250j** 58 42 42 36 42 36 42 36 42 0.33 mkp386m433250j** 91 63 63 54 63 60 63 60 63 0.39 mkp386m439250j** 88 63 63 54 63 60 63 60 63 0.47 mkp386m447250j** 84 63 63 54 63 60 63 60 63 0.47 mkp386m447250y** 45.5 50 50 48 55 55 55 50 50 0.56 mkp386m456250y** 51.5 45 45 40 45 45 45 45 45 0.68 mkp386m468250y** 57.5 35 35 36 40 40 40 35 35 0.82 mkp386m482250y** 67 35 35 36 40 40 40 35 35 packaging information u rdc (v) cap. (f) ordering code (1) mass (g) terminal available - spq (pcs) t1 t2 t3 t4 t5 t6 t7 t8 mkp metallized polypropylene metal spray layer mkp metallized polypropylene metal spray layer
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 9 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mounting normal use the capacitors are designed for mounting on printed-circuit boards or igbt or gto modules. specific method of mountin g to withstand vibration and shock in order to withstand vibra tion and shock tests, the capacitors shall be mechanically fixed by tabs it must be ensured that the tabs are scre wed tightly on the test board. when the weight of the capacito r is bigger than 50 g it needs a clamp in the body of the capacitor. soldering conditions storage temperature t stg = - 25 c to + 35 c with rh maximum 75 % without condensation. ratings and characteristics reference conditions unless otherwise specified, all el ectrical values apply to an ambient temperature of 23 c 1 c, an atmospheric pressure of 86 kpa to 106 kpa and a relative humidity of 50 % 2 %. for reference testing, a conditio ning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. characteristics capacitance as a function of ambient temperature (typical curve) impedance as a func tion of frequency (typical curve) impedance as function of fr equency for box length 44.0 mm (typical curve) max. dc and ac voltage as a function of temperature - 60 - 40 - 20 c/c (%) 2 3 - 2 - 3 - 4 - 5 - 6 0 1 - 1 0 40 60 80 20 100 t amb (c) 4 1 000 000 100 000 10 000 10 000 000 f (hz) 1 f 4 f 10 f 0.01 0.1 1 10 100 box length 33.5 mm box length 44.0 mm box length 57.5 mm z ( ) 10.00 1.00 0.10 0.00 10 000 100 000 1 000 000 10 000 000 0.01 z ( ) 5 f 2 f z ( ) f (hz) - 60 - 20 20 60 100 t amb (c) 0 1.0 0.8 0.6 0.4 0.2 1.2 factor
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 10 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 characteristics insulation resistance as a function of ambient temperature (typical curve) maximum allowed component temperature rise ( ? t) as function of the ambient temperature (t amb ) maximum rms voltage (sinewave) as a function of frequency 10 8 10 6 10 4 0 20 40 60 80 100 t amb (c) rc (s) - 60 - 40 - 20 0 20 40 60 80 100 t amb (c) 0 14 12 10 8 6 4 2 16 t (c) 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) t amb 85 c, 700 v dc capacitance in f 0.47 1.0 2.2 4.7 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) 85 c < t amb 105 c, 700 v dc capacitance in f 0.47 1.0 2.2 4.7 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) t amb 85 c, 850 v dc capacitance in f 0.47 1.0 2.2 4.0 5.0 10 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) 85 c < t amb 105 c, 850 v dc capacitance in f 0.47 1.0 2.2 4.0 5.0 10
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 11 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 maximum rms voltage (sinewave) as a function of frequency 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) t amb 85 c, 1000 v dc capacitance in f 0.47 1.0 1.5 3.3 4.7 7.0 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) 85 c < t amb 105 c, 1000 v dc capacitance in f 0.47 1.0 1.5 3.3 4.7 7.0 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) t amb 85 c, 1250 v dc capacitance in f 0.39 0.68 1.5 2.2 3.0 4.7 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) 85 c < t amb 105 c, 1250 v dc capacitance in f 0.39 0.68 1.5 2.2 3.0 4.7 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) t amb 85 c, 1600 v dc capacitance in f 0.22 0.47 1.0 1.5 2.0 2.5 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) 85 c < t amb 105 c, 2000 v dc capacitance in f 0.047 0.10 0.22 0.47 0.68 1.5
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 12 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 maximum rms voltage (sinewave) as a function of frequency maximum i rms current in function of the ambient temperature 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) t amb 85 c, 2000 v dc capacitance in f 0.047 0.10 0.22 0.47 0.68 1.5 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) 85 c < t amb 105 c, 2000 v dc capacitance in f 0.047 0.10 0.22 0.47 0.68 1.5 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) t amb 85 c, 2500 v dc capacitance in f 0.047 0.10 0.15 0.33 0.47 0.82 10 100 1000 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) 85 c < t amb 105 c, 2500 v dc capacitance in f 0.047 0.10 0.15 0.33 0.47 0.82 100 60 70 80 90 50 110 maximum ambient temperature (c) 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 i rm s operational/i rm s max.
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 13 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 marking product marking and identification the capacitor is marked by laser print or stamp, with following information: 1. manufacturers logo 2. code for dielectric material (mkp) 3. manufacturers type designation (386) 4. single metallized (m) 5. rated capacitance value (5 f) 6. tolerance on rated capacitance (j = 5 %) 7. rated dc voltage (700 v) 8. code for factory of origin (f) 9. year and week of manufacture (e.g. 0825) printing example: packing bar code label 1. manufacturers logo 2. country of origin 3. sub family 4. type description 5. capacitance value, tolerance, voltage and climatic category according to iec 60068-1 6. production center 7. preference origin code: a ? country of origin in code 8. product type description 9. batch number 10. quantity and production date, year week code 11. product code label example: power dissipation and maximum component temperature rise the power dissipation must be limited in order not to exceed the maximum al lowed component temperature rise as a function of the free air a mbient temperature. the power dissipation can be calculated according type detail specification hqn-384-01/101: technical information film capacitors with the typical tgd of the curves. the component temperature rise ( ? t) can be measured (see section measuring the component temperature for more details) or calculated by ? t = p/g: ? ? t = component temperature rise (c) with maximum of 10 c rise (c) ? p = power dissipation of the component (mw) ? g = heat conductivity of the component (mw/c) vi s hay 5f j 700v 3 86m mkp f0825 heat conductivity (g) as a function of original pitch and capacitor body thickness in mw/c w max. (mm) heat conductivity (mw/c) box length 33.5 mm box length 44.0 mm box length 58.0 mm 22 75 100 - 25 - - 155 30 - 140 170 35 - - 200
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 14 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 measuring the component temperature a thermocouple must be attached to the capacitor body as in: the temperature is meas ured in unloaded (t amb ) and maximum loaded condition (t c ). ? the temperature ri se is given by ? t = t c - t amb . ? to avoid radiation or convection, the capacitor should be tested in a wind-free box. application note and limiting conditions these capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. thes e mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conf orming the standards must be used. to select the capacitor for a certain application, the following conditions must be checked: 1. the peak voltage (u p ) shall not be greater than the rated dc voltage (u rdc ) 2. the peak-to-peak voltage (u pp ) shall not be greater than the maximum (u pp ) to avoid the ionization inception level 3. the voltage peak slope (du/dt) shall not exceed the rated voltage pulse slope in an rc-circuit at rated voltage and without ringing. if the pulse voltage is lower than the rated dc vo ltage, the rated voltage pulse slope may be multiplied by u rdc and divided by the applied voltage. ? for all other pulses following equation must be fulfilled: ? t is the pulse duration. 4. the maximum component surfac e temperature rise must be lower than the limits (see figure max. allowed component temperature rise) 5. since in circuits used at voltages over 280 v peak-to-peak the risk for an intrinsically active flammability after a capacito r breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table heat conductivity 6. when using these capacitors as across-the-line capacitor in th e input filter for mains applications or as series connected with an impedance to the mains the applic ant must guarantee that the following cond itions are fulfilled in any case (spikes and surge voltages from the mains included) voltage conditions for 6 above allowed voltages t amb ? 85 c 85 c ? t amb ? 105 c maximum continuous rms voltage u rac 0.7 x u rac maximum temporary rms over voltage (< 24 h) 1.25 x u rac 0.875 x u rac maximum peak voltage (v o-p ) (< 2 s) 1.6 x u rdc 1.1 x u rdc thermocouple thermocouple 2 du dt ------- - ?? ?? 2 0 t ? x dt u rdc x du dt ------- - ?? ?? rated ? ?
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 15 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 inspection requirements general notes sub-clause numbers of tests an d performance requirements refer to the secti onal specification, pu blication iec 60384-17. group c inspection requirements sub-clause number and test cond itions performance requirements sub-group c1a part of sample of sub-group c1 4.1 dimensions (details) as specified in chapters general data of this specification ? 4.3.1 initial measur ements capacitance tangent of loss angle: ? for c > 1 f at 1 khz ? for c ? 1 f at 10 khz ? 4.3 robustness of terminatio ns tensile: load 30 n; 10 s ? no visible damage 4.4 resistance to solder ing heat no pre-drying method: 1a solder bath: 265 c duration: 10 s ? 4.4.2 final measurements visual examination no visible damage legible marking ? capacitance | ? c/c| ? 2 % of the value measured initially ? tangent of loss angle increase of tan ? : ? 0.002 ? compared to values measured initially ? insulation resistance ? 50 % values specified in section insulation resistance of this specification sub-group c1b part of sample of sub-group c1 4.6.1 initial measur ements capacitance ? tangent of loss angle: ? for c > 1 f at 1 khz ? for c ?? 1 f at 10 khz ? 4.6 rapid change of temperature ? a = - 55 c ? ? b = + 105 c 5 cycles ? duration t = 30 min ? visual examination ? ? ? ? ? no visible damage 4.7 vibration mounting: see section mounting of this specification procedure b4: frequency range: 10 hz to 55 hz amplitude: 0.75 mm or acceleration 98 m/s2 (whichever is less severe) total duration 6 h ? ? ? ? ? ? ? 4.7.2 final inspection visual examination no visible damage ? 4.9 shock mounting: see section mounting for more information ? pulse shape: half sine ? acceleration: 490 m/s2 ? duration of pulse: 11 ms ? visual examination ? ? ? ? ? no visible damage
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 16 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c1b part of sample of sub-group c1 4.9.3 final measurements capacitance | ? c/c| ? 2 % of the value measured initially ? tangent of loss angle increase of tan ??? 0.002 ? compared to values measured initially ? insulation resistance ?? 50 % values specified in section insulation resistance of this specification ? 4.15 solvent resistance of the marking isopropyl alcohol at room temperature ? method: 1 ? rubbing material: cotton wool ? immersion time: 5 min 0.5 min no visible damage ? legible marking sub-group c1 combined sample of sp ecimens of sub-groups c1a and c1b 4.10 climatic sequence ? 4.10.2 dry heat temperature: + 105 c duration: 16 h ? 4.10.3 damp heat cyclic ? test db, first cycle ? 4.10.4 cold temperature: - 55 c duration: 2 h ? 4.10.6 damp heat cyclic ? test db ? remaining cycles ? 4.10.6.2 final measurements voltage proof = u rdc for 1 min within ? 15 min after removal from test chamber ? no breakdown or flash-over visual examination no visible damage legible marking ? capacitance | ? c/c| ? 3 % of the value measured initially ? tangent of loss angle increase of tan ???? 0.002 ? compared to values measured in 4.3.1 or 4.6.1 as applicable ? insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub-group c2 4.11 damp heat steady state ? 4.11.1 initial measur ements capacitance tangent of loss angle at 1 khz ? 4.11.3 final measurements visual examination ? voltage proof = u rdc for 1 min within ? 15 min after removal from test chamber no visible damage legible marking ? no breakdown or flash-over ? capacitance | ? c/c| ? 3 % of the value measured in 4.11.1. ? tangent of loss angle increase of tan ??? 0.002 ? compared to values measured in 4.11.1 ? insulation resistance ? 50 % of values specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements
mkp386m snubber www.vishay.com vishay roederstein revision: 08-jul-13 17 document number: 28170 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c3a 4.12.1 endurance test ? at 50 hz alternative voltage duration: 2000 h ? 1.25 x u rac at 85 c ? 0.875 x u rac at 105 c ? 4.12.1.1 initial meas urements capacitance ? tangent of loss angle at: ? for c > 1 f at 1 khz ? for c ? 1 f at 10 khz ? 4.12.1.3 final measurements visual examination no visible damage legible marking ? capacitance | ? c/c| ? 5 % compared to values measured in 4.12.1.1 ? tangent of loss angle increase of tan ? : ? ? 0.0015 for c ? 1 f ? ? 0.0015 for c > 1 f compared to values measured in 4.12.1.1 ? insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub-group c4 4.2.6 temperature characteristics ? initial measurements ? intermediate measurements capacitance ? capacitance at - 55 c ? capacitance at 20 c ? capacitance at + 105 c for - 55 c to 20 c ? 0 % ? | ? c/c| ? 2.75 % or ? for 20 c to 105 c ? - 5.5 % ? | ? c/c| ? 0 % ? as specified in section capacitance of this specification ? 4.13 charge and disc harge 10 000 cycles (1...50 c/s) 2.5 x (du/dt) r charge to u rdc ? with maximum pulse slope ? 0.01 (du/dt) r ? duration: 5 ms ? ? discharge resistance: ? ? ? 4.13.1 initial measur ements capacitance tangent of loss angle at: ? for c > 1 f at 1 khz ? for c ? 1 f at 10 khz ? 4.13.3 final measur ements capacitance | ? c/c| ? 5 % compared to values measured in 4.13.1. ? tangent of loss angle ? increase of tan ? : ? ? 0.0015 for c ? 1 f ? ? 0.0015 for c > 1 f compared to values measured in 4.13.1 ? insulation resistance ? 50 % of values specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements r un v dc ?? 2.5 x c (du/dt) --------------------------------------- - =
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of MKP386M510100JT2

	To Download MKP386M510100JT2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .